TENRYU POWER TOOL SERIES

SKU: PT

Exceptional features and superior quality, Thin Kerf

TENRYU's comprehensive line of blades for portable and stationary power tools. More variety, better quality and greater value. Sizes range from 4" to 12" for most types of applications. The TENRYU PT SERIES goes on to include thin kerf wood cutting blades designed especially for smooth cuts on miter and slide-compound.

BLADE FEATURES:

  • Fully hardened, expertly tensioned tool steel bodies absorb impact, remain flat and true, and resist excess heat build-up.
  • High-grade, C-3, fine-grain tungsten carbide tips resist erosion for extended blade life.
  • Aggressive rake angles for maximum cutting speed and efficiency.
  • Each tip is precision honed on all four exposed surfaces. This minimizes micro-chipping along the sharp edge of the blade and results in a sharper, longer-lasting edge.
  • Thin kerf for less waste and lighter cutting performance (reduced feed pressure).
  • Inserted tooth design on some models greatly increases the body-to-tip braze area for greater support and tip strength.
  • Expansion slots and/or variable pitch gullets keep blade cool under stressful work loads.
  • Can be resharpened for extended blade life.

 


    

POWER TOOL SERIES - Primarily for Portable Saws and Table Saws

 

MODEL # DIA. TEETH ARBOR GRIND KERF RAKE APPLICATION
PT-10024 4" 24 20mm ATAF .055" 18 For woodworking on Makita 4" trim saw.
PT-10006-1 4" 6 22mm FTG .157" 20 For very clean and accurate biscuit slots in all woods.
PT-10006-2 4" 6 22mm ATAFR .157" 25/-15 For exceptionally clean and smooth biscuit slots in all woods.
PT-11036 4-3/8" 36 20mm ATAF .063" 15 For fine trim work on corded Makita trim saws.
PT-11536 4-1/2" 36 3/8" ATAF .063" 15 For clean and easy trim work on the Porter Cable trim saw.
PT-14036 5-1/2" 36 5/8"/ 1/2" ATAF .063" 15 For fine and easy trim work on Makita or Skil circular saws.
PT-15236 6" 36 1/2" ATAF .063" 15 For excellent results on 6" Porter Cable corded or cordless saws.
PT-16524 6-1/2" 24 5/8"KO ATB .079" 20 For woodworking on 6-1/2" corded saws. FAST!
PT-16524-T 6-1/2" 24 5/8"KO ATAF .059" 20 For very fast and easy work on 6-1/2" corded or cordless saws.
PT-16540 6-1/2" 40 5/8"KO ATB .079" 20 For finer cuts on corded 6-1/2" saws.
PT-16540-CR 6-1/2" 40 BEVEL ATB .063" 18 For use on the CRAIN JAMB SAW for carpet/flooring installers.
PT-16540-T 6-1/2" 40 5/8"KO ATB .063" 18 ULTRA-THIN kerf for fine work on corded or cordless saws.
PT-16552-T 6-1/2" 52 5/8"KO ATAF .063" 18 ULTRA-THIN kerf for SUPER clean work on 6-1/2" saws.
PT-18516B 7-1/4" 16 5/8"KO ATB .073" 27 Our super fast framing and ripping blade with INSERTED teeth.
PT-18520B 7-1/4" 20 5/8"KO ATB .073" 27 Fast and furious 20 tooth INSERTED TOOTH blade for framers.
PT-18524AM 7-1/4" 24 5/8"KO ATB .070" 20 24 tooth contractor blade. Fast with long cutting life.
PT-18524P 7-1/4" 24 5/8"KO ATB .070" 20 BULLFROG. The choice when cutting pressure treated or wet lumber. COATED.
PT-18524P3 7-1/4" 24 5/8"KO ATB .070" 20 3-Pack BULLFROG Blades
PT-18524V 7-1/4" 24 5/8"KO ATB .070" 20 CITATION. The unique VARIABLE PITCH framing blade for FAST, smooth cutting.
PT-18524V3 7-1/4" 24 5/8"KO ATB .070" 20 3-Pack CITATION Blades
PT-18540 7-1/4" 40 5/8"KO ATB .073" 27 Spectacular INSERTED TOOTH finish blade. Great performance.
PT-18540B 7-1/4" 40 5/8"KO ATAF .063" 27 ULTRA-THIN kerf for finish cross-cutting. Bulk packaged.
PT-18540-T 7-1/4" 40 5/8"KO ATB .063" 18 ULTRA-THIN blade for finish work on circular or trim saws.
PT-18552-T 7-1/4" 52 5/8"KO ATAF .063" 18 ULTRA-THIN, ultra-fine blade for trim work. For finest cuts.
PT-20360 8" 60 5/8"KO ATAF .087" 5 A no-nonsense clean cutting 8" woodcutting blade. Also for Panel saws.
PT-21018 8-1/4" 18 5/8"KO ATB .075" 25 Fast cutting for woodworking and ripping on table or circular saws. INSERTED TOOTH DESIGN.
PT-21040 8-1/4" 40 5/8"KO ATB .079" 15 The tremendously popular 8-1/4" Power Tool Series blade. For table or portable saws.
PT-21060 8-1/4" 60 5/8"KO ATAF .079" 12 For fine cuts in wood with a table saw or circular saw.
PT-26036 10-1/4" 36 5/8"KO ATAF .079" 20 For woodworking on modified circular saws.

POWER TOOL SERIES FOR MITER & SLIDE MITER SAWS



The "PT" Series blades for miter or slide miter saws range in sizes from 8-1/2" for the popular Hitachi through 12" diameters. 14" blades for older saws can be found on in our Pro Series for Wood. 15" miter saw blades are available in our Miter-Pro Series.
NOTE: This series may also be used for crosscutting applications on table saws.

EACH BLADE FEATURES:

  • Thin kerf design is easier on miter saw motors and brakes.
  • Fully hardened, expertly tensioned tool steel bodies.
  • Fine grain tungsten carbide tips with fine grit honing for keen edges.
  • Excellent price/value

POWER TOOL SERIES - For Miter or Slide Miter Saws

MODEL # DIA. TEETH ARBOR GRIND KERF RAKE APPLICATION
PT-21624 8-1/2" 24 5/8" ATB .087" 15 A fast cutting blade for use on 8-1/2" saws in thick wood.
PT-21640 8-1/2" 40 5/8" ATB .087" 15 A super blade for use on 8-1/2" saws in wood.
PT-21660-1 8-1/2" 60 5/8" ATAF .079" 5 A super performer on 8-1/2" miter saws.
PT-21680 8-1/2" 80 5/8" ATAF .087" 10 For extra-clean cuts in wood and thin products.
PT-23040 9" 40 5/8" ATAF .087" 5 Our Power Tool Series blade for 9" miter or table saws.
PT-25540 10" 40 5/8" ATB .083" 0 Used for miter or table saws.
PT-25550 10" 50 5/8" ATAF .091" 15 UINSERTED TEETH. For use on miter saws. Great value.
PT-25560 10" 60 5/8" ATB .083" 0 Used for miter or slide miter saws.
PT-25560D 10" 60 5/8" TCG .087" 10 Triple chip woodworking blade for man-made wood materials.
PT-25572A 10" 72 5/8" ATB .098" 15 Clean performance on miter saws.
PT-25590 10" 90 5/8" ATAF .091" 10 For super clean cuts in thin wood on miter saws.
PT-30560 12" 60 1" ATAF .094" 3 Thin kerf. Outstanding value. Excellent woodworking miter or radial arm saw blade for thick stock.
PT-30580 12" 80 1" ATAF .094" 5 Thin kerf. Fine cut-off blade for woodworking on miter or radial arm saws for medium stock.
PT-305100 12" 100 1" ATAF .094" 5 Thin kerf. Extra clean cuts in wood on your miter or radial arm saw for thin stock.